Furnace Cleaning Severance CO for cleaner heat and lower bills

Furnace Cleaning Severance CO is what we do every heating season, pulling dust, pet hair, and debris out of your furnace and ductwork so your system runs cleaner and cheaper.

Serving Severance and nearby areas.

How big is the cleaning job?

Larger home

More registers, longer duct runs, or a finished basement that adds branches to clean.

  1. 1. Single system One furnace and a standard duct run in a typical ranch or smaller two-story home.
  2. 2. Larger home More registers, longer duct runs, or a finished basement that adds branches to clean.
  3. 3. Heavy buildup Never-cleaned systems or post-construction debris. We plan the extra time in writing first.
  • 24Services from one local team
  • 15Areas served around Severance
  • Camera firstWe look inside before we clean
  • Measure twiceAirflow checked before and after

What is included in furnace cleaning

Every furnace cleaning we do in Severance covers the full system, not just the easy-to-reach parts. Here is what is included in a standard visit.

hvac repair for Severance homes

Work order

Furnace Cleaning
  • Blower assembly cleaning: We pull the blower, clean the wheel and housing by hand, and check the motor and capacitor. A dirty blower wheel is the most common cause of weak airflow we see in Severance homes.
  • Burner and ignition cleaning: Burners get wire-brushed, the flame sensor gets polished, and the igniter gets checked. This is what keeps the furnace lighting reliably on cold mornings instead of clicking and shutting down.
  • Heat exchanger inspection: An inspection camera goes into the heat exchanger to look for cracks, corrosion, and soot. If we find a problem, you see the photo and we talk through options before anything else happens.
  • Duct and register cleaning: Rotary brushes run through every branch line while negative air pulls debris into a HEPA vacuum. Registers and return grilles get pulled and cleaned. This is the part most homeowners notice immediately.
  • Combustion and airflow testing: We use a combustion analyzer and manometer to verify the furnace is burning clean and moving the right amount of air. If static pressure is high, we identify the restriction and fix what we can.
  • Filter replacement and report: A fresh filter goes in, the size is written on the furnace door, and you get a written report with photos. We tell you what we found, what we cleaned, and what to watch for next season.

What the first visit covers

First visit

We inspect the furnace and ducts with a camera, clean the blower and burners, brush the duct runs, and leave a written report with photos.

Furnace cleaning at your home

We clean residential furnaces and duct systems across Severance and the surrounding Weld County communities.

  • New construction

    Drywall dust and debris cleared from ducts

  • Older homes

    Deeper duct cleaning and heat exchanger inspection

  • Pets and allergies

    Full system clean with filter upgrade options

  • Pre-sale prep

    Documented cleaning for home inspection

Furnace Cleaning

Furnace cleaning for Severance businesses

We clean commercial heating equipment for shops, offices, and light industrial spaces in the Severance area.

  • Retail and office

    Rooftop and cabinet unit cleaning

  • Light industrial

    Heavy-duty cleaning for shop environments

  • Multi-unit properties

    Scheduled cleaning with per-unit reports

What Furnace Cleaning Severance CO actually involves

Furnace cleaning is not glamorous work, but it is the cheapest thing you can do to keep a heating system running through a Colorado winter. We do it properly, document what we find, and leave your system in better shape than we found it.

Furnace Cleaning Severance CO is a full mechanical and airflow service, not just a vacuum pass. We pull the blower assembly, clean the wheel and housing, inspect the heat exchanger for cracks, wipe down the burners, and clear the flame sensor and igniter. On the duct side, we run rotary brush and negative-air equipment through the trunk lines and branches, then pull the debris into a HEPA vacuum so it leaves your home instead of settling back into your living room. Every job ends with a filter change and a combustion check.

Severance sits in Weld County where winter temperatures swing hard and furnaces run six to seven months a year. That run time pulls dust, drywall powder from new construction, and pet dander into the blower and ducts faster than most homeowners expect. If you have been searching for Furnace Cleaning near me Severance CO, the answer is usually a two- to four-hour visit. We also handle furnace and duct cleaning Severance CO as a single bundled appointment so you only take one day off work.

Local Furnace Repair team in Severance
What it is
A full mechanical and airflow cleaning of furnace and ducts
When it helps
Every two to three years, or after a new build
What you get
Cleaner air, restored airflow, and a written report

Our furnace cleaning process, step by step

Every job follows the same five steps so you know exactly what happens from the moment we pull into your driveway until we hand you the…

  1. System inspection

    We start with a walkthrough of your furnace, duct runs, and return grilles.

  2. Furnace teardown

    We kill power and gas, then pull the blower assembly, burners, and flame sensor.

  3. Duct cleaning

    Rotary brushes run through every branch line while a negative-air machine pulls the loosened debris into a HEPA filter.

  4. Reassembly and testing

    Everything goes back together with new gaskets where needed.

  5. Report and filter change

    You get a written summary with photos of what we found, what we cleaned, and anything that needs watching.

Tools and methods we use

Each method answers a different question. Together they leave very little to guess.

Flexible brushes that spin inside duct runs to knock debris off the walls. Works on both rigid metal and flex duct without damaging the liner.

Pulls loosened debris out of the duct system and traps it in a HEPA filter so it leaves your home instead of settling in the living room.

Goes into the heat exchanger and trunk lines so we can see cracks, corrosion, and debris without tearing anything apart.

Reads the flue gases to confirm the furnace is burning clean and not producing excess carbon monoxide.

Measures static pressure across the blower so we can tell whether airflow is restricted and by how much.

When to book furnace cleaning in Severance

  • You just moved into a new construction home in Severance and the dust will not stop

    New builds leave drywall dust, sawdust, and construction debris in the ductwork that keeps circulating for years.

    Homes
  • Your furnace has not been cleaned in three or more years

    We do a full system clean: blower, burners, flame sensor, heat exchanger inspection, and duct cleaning.

    Homes
  • Someone in the house has allergies or asthma that get worse in winter

    We clean the duct system and furnace, then recommend a filter upgrade matched to your system.

    Homes
  • You are selling your Severance home and want the furnace in good shape for inspection

    We clean the furnace and ducts, inspect the heat exchanger with a camera, and provide a written report you can hand to…

    Homes

How furnace cleaning works in Severance

Severance sits at about 5,000 feet in Weld County, and the heating season runs from October through April most years. Furnaces here work hard, and the dry climate means dust stays airborne longer and settles into ductwork faster than in more humid parts of the country.

  • Downtown Severance

    Older homes with original ductwork. We often find more leakage and buildup here, so duct cleaning tends to run longer than on newer builds.

  • Severance new builds

    Construction debris in the ducts is standard. We recommend a cleaning within the first 12 months to get drywall dust out before it circulates for years.

  • Windsor-adjacent neighborhoods

    Larger homes with longer duct runs. Static pressure testing matters more here because airflow restrictions show up faster.

Severance Furnace Repair Pros — your local Furnace Repair team
  • Downtown Severance
  • Severance new builds
  • Windsor-adjacent neighborhoods
  • Eaton and Timnath border areas

From problem to finished result.

Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.

Quality Furnace Cleaning in SeverancePhoto
  • New build duct cleaning in Severance

    Before: A family moved into a new construction home in Severance and could not keep up with the dust. Furniture was coated within two days of cleaning, and the furnace filter was clogging every three weeks. The ducts had never been cleaned since the build.

    After: We pulled a significant amount of drywall dust and sawdust out of the trunk line and branches. After the clean, the filter lasted its normal three months and the family reported a noticeable drop in visible dust within the first week.

  • Older furnace restored in downtown Severance

    Before: A 15-year-old furnace in downtown Severance was short-cycling and blowing lukewarm air. The homeowner assumed it needed replacement. The blower wheel was caked with dust and the flame sensor was fouled.

    After: We cleaned the blower, burners, and flame sensor, then tested temperature rise and static pressure. The furnace held temperature properly again and stopped short-cycling. The homeowner avoided a replacement that season.

  • Allergy relief for a Severance family

    Before: A family in Severance with two kids and a dog was dealing with year-round allergy symptoms that got worse every winter. The duct system had not been cleaned in five years and the return grilles were visibly dusty.

    After: We cleaned the full duct system and furnace, then upgraded the filter to a higher MERV rating matched to the blower. Within a week the family reported less morning congestion and noticeably less dust on surfaces.

Problems furnace cleaning solves in Severance

Most furnace problems we see in Severance trace back to dirt and airflow, not failed parts. Cleaning fixes more of them than homeowners expect.

Ask about yours

  • Furnace blowing cold air or weak heat

    A dust-packed blower wheel moves far less air than it should, so the furnace overheats, trips the limit switch, and shuts down before the house warms…

  • Dust and debris blowing from vents

    When ducts are loaded with dust, every heating cycle pushes that material into your living space.

  • Musty or burning smell when heat kicks on

    A burning smell on first startup is normal for a few minutes, but a persistent musty odor usually means dust and organic debris are sitting on…

  • Higher gas bills with no change in usage

    A dirty system runs longer to hit the same setpoint, and that shows up on your bill every month.

Why Severance homeowners book furnace cleaning

A dirty furnace and duct system costs you money every month and puts more dust in the air your family breathes.

Lower heating bills

A clogged blower wheel and dust-packed return duct can cut airflow by 20 to 30 percent, which forces the furnace to run longer to…

Cleaner indoor air

Dust, pollen, and pet dander that sit in the ductwork get pushed into every room each time the blower kicks on.

Fewer breakdowns

Dust is abrasive. It wears blower motor bearings, fouls the flame sensor, and clogs the secondary heat exchanger.

Longer equipment life

A furnace that runs clean lasts years longer than one that runs hot and strained.

What you receive after the job

Clear records you can keep and share.

  • Written findings

    A summary of what we found and cleaned

  • Before and after photos

    Images of the blower, ducts, and heat exchanger

  • Filter size note

    The correct size written on the furnace door

Before work starts

A plan in writing

Ask for a written scope

Ten years cleaning furnaces in Weld County

Severance Furnace Repair Pros has been working on residential heating systems since 2016.

Local Furnace Repair team in Severance

Static pressure

Read with a manometer across the blower to show whether airflow is restricted.

Flue gas readings

Read with a combustion analyzer to confirm the furnace is burning clean and safe.

Heat exchanger view

Read with an inspection camera to check for cracks, corrosion, and soot buildup.

Are you in our Severance service area?

Type your ZIP or town to check. If yours is not listed, call and ask.

Severance ZIP codes

  • 80650
  • 80546
  • 80550
  • 80610

Towns we serve.

Based in Severance and covering the places around it. Pick one for local details.

View all service areas

What Severance homeowners say

We moved into a new build in Severance and the dust was unbelievable for the first year. Called these guys for duct cleaning and they pulled out a shocking amount of drywall dust. Furnace runs quieter now and the dust on the furniture has dropped way off. They showed me photos of the before and after, which I appreciated.
Marcus T.Homeowner, Severance
Our furnace was short-cycling and I figured it was on its way out. They came out, cleaned the flame sensor and blower, and it has been running fine ever since. Saved me from buying a new furnace. The tech walked me through everything he did and did not try to sell me anything extra.
Dana R.Homeowner, Windsor
I manage several rentals in the Severance and Greeley area and use these guys for all the furnace cleanings. They show up when they say they will, the pricing is flat, and they send me a report with photos for each unit. Makes my job a lot easier when I can hand the owner documentation.
Kevin S.Property manager, Greeley

Frequently asked questions about furnace cleaning

Short answers for the first few minutes. The team can cover the rest.

Still have a question?

Describe what you are seeing and we will point you to the right next step.

(970) 1234567

A standard clean on a 1,500-square-foot ranch with six registers sits at the low end. Larger two-story homes with 12 or more registers, or systems that have never been cleaned, land at the higher end. We quote flat before we start.

Every two to three years for most Severance homes, and every year if you have pets, allergies, or a recently renovated house. New construction is the exception: book a cleaning within the first 12 months because drywall dust and construction debris settle into the ducts during the build and keep circulating for years afterward.

Severance Furnace Repair Pros handles furnace and duct cleaning across Severance, Windsor, Eaton, Timnath, and the rest of Weld County. We are local, we carry the right equipment for real duct work, and we have been doing this since 2016. Call (970) 1234567 and we can usually schedule you the same week.

Yes. Ductwork acts as a reservoir for dust, pollen, and pet dander, and every time the blower runs it pushes that material into your living space. Removing the reservoir cuts airborne particles noticeably. Homeowners with allergies often report less morning congestion within a week. A fresh filter after cleaning keeps the improvement going.

Book Furnace Cleaning Severance CO today

(970) 1234567

If your furnace has not been cleaned in two years or more, you are paying for it every month.

Call for Furnace Repair in Severance

Call (970) 1234567 and describe what your furnace is doing. We answer, triage the symptom and give you a two-hour arrival window. Regular hours run 8 a.m. to 6 p.m. Monday through Friday, with emergency coverage for no-heat calls. If you are in ZIP 80650, 80546, 80550 or 80610, you are in our regular service area.

Request a visit

How soon do you need us?

Thanks. Your request is in and the team will follow up shortly.

Call now(970) 1234567