About Furnace Repair Severance CO: Ten Years on the Ground
We have handled Furnace Repair Severance CO calls since 2016, and our techs carry NATE certification and EPA Section 608.
- 24Services from one local team
- 15Areas served around Severance
- Test firstMeter and combustion readings before any quote
- Plain notesWhat failed, why, and what it costs
How We Got Started Here
We test gas pressure with a manometer, check flame signal, and read flue gases before we call a furnace fixed. Parts come off the truck, not a warehouse. You see every reading and every failed component before we hand you the bill.
Test before replace
Readings first, parts second, every call.
Parts on the truck
Igniters, sensors, and motors stocked for same-day fixes.
Show the failure
You see the camera footage and the meter.
What We Stand For
Our mission is simple: get heat back into your house and explain exactly what failed, in plain language, before we touch a wrench. That means no mystery invoices and no upsell on parts your furnace does not need. When we diagnose a dirty flame sensor, we clean it and test it. When we find a cracked heat exchanger, we show you the camera footage and walk you through replacement options. As a Severance furnace repair company, we would rather fix what is broken and earn the next call than sell you a system you did not ask for.
The Rules We Work By
Four habits shape every call we run in Severance, whether it is a 2 a.m. no-heat emergency in December or a routine tune-up in July. None of them are slogans.
Diagnose Before Quote
We run the full sequence before we name a price: gas pressure with a manometer, flame signal with a multimeter, temperature rise across the heat exchanger, and flue readings with…
Show the Failure
If your blower motor is drawing high amps or your control board has a burnt trace, we show you.
Stock the Common Parts
Our trucks carry igniters, thermocouples, flame sensors, capacitors, limit switches, gas valves, and blower motors for the brands we see most in Severance.
Leave It Code-Correct
We do not cut corners on flue work or clearance to combustibles. When we finish, the system passes inspection and your family is safe in the house.
Why Furnace Repair Severance CO Homeowners Call Us
We are not the biggest shop in Weld County, and that is the point.
-
Diagnostics before quotes
Every call starts with a multimeter, a manometer and a combustion analyzer. We meter the igniter, test the flame sensor and check gas pressure before we quote a repair.
-
Parts on the truck
We stock igniters, thermocouples, flame sensors, capacitors, control boards and common blower motors for Carrier, Trane, Goodman, Rheem, Lennox, Bryant, York and American Standard.
-
Ten years in Weld County
Severance Furnace Repair Pros has worked this area since 2016. We know how propane systems behave on the rural edges of town and how hard the dust hits blower wheels out here.
The People in the Van
Our crew is small on purpose. Six techs, two installers, and a dispatcher who has lived in Weld County her whole life. Most of our team came up through trade school and apprenticeship, and a few have been turning wrenches for over two decades. We work out of Severance, which means we know which streets flood when the snow melts and which older homes still have undersized returns from the original build. When you call for a local hvac repair team in Severance, Colorado, you get someone who has been in a hundred houses like yours.
Furnace Repair and hvac repair Severance Services
One truck, one call, and the full range of furnace work: repair, replacement, tune-ups, safety inspections and brand-specific service.
Furnace Repair
Diagnostic-first repair for no-heat calls, short cycling and weak airflow.
Furnace Replacement
When a cracked heat exchanger or a failed blower motor makes repair the wrong money, we size and swap the unit.
Furnace Installation
New furnace installs for Severance homes, including gas line checks, flue connections and thermostat wiring.
Emergency Furnace Repair
Emergency hvac repair Severance CO homeowners call at 2 a.m. in January. No heat with a house full of kids is not a wait-until-Monday problem.
What Severance Customers Say
Our furnace quit on a Sunday night in January and the house was down to 58 degrees by morning. They had a tech out before noon, found a failed igniter and had heat back in under an hour. He showed me the cracked igniter before he swapped it. Fair price, no upsell on a new furnace.
Marisol V.Homeowner, Severance
Called about a banging noise every time the heat kicked on. Turned out to be delayed ignition and dirty burners. They cleaned everything, checked gas pressure and the noise stopped that day. Also flagged a weak capacitor on the blower and replaced it while they were there.
Devon A.Homeowner, Windsor
Got three quotes for a furnace replacement and theirs was the only one that actually did a load calculation. Install took most of a day, they hauled the old unit out and walked me through the new thermostat. Two months in and the house heats evenly for the first time.
Priya R.Homeowner, Timnath
Furnace was blowing cold air and I figured it was dead. Tech tested the flame sensor, cleaned it and the thing fired right up. Charged me the diagnostic and a small part, not a new furnace. Honest work, and he explained why the sensor had coated up.
Terrence O.Homeowner, Eaton
Scheduling was a little slow during the first cold snap, took two days to get out. Once the tech arrived he was thorough, found a cracked heat exchanger with the camera and showed me the footage. We went with a replacement and the install was clean. Would call again, just book earlier.
Hana K.Homeowner, Johnstown
Propane furnace on our place out past the county line was short cycling all winter. They adjusted the air mixture, replaced a thermocouple and checked the regulator. Runs steady now and the propane bill dropped. Good to have someone who knows propane systems out here.
Miguel S.Rural property owner, Weld County
Furnace Repair Severance CO Questions
The questions we get most on the phone, answered straight. If yours is not here, call and we will talk it through.
Describe what you are seeing and we will point you to the right next step.
(970) 1234567The right shop is the one that tests before it quotes. Ask whether they use a combustion analyzer and an inspection camera, whether the diagnostic fee is credited toward the repair, and whether they stock common parts for your brand.
Yes. No-heat calls do not wait for business hours, and neither do we. If your furnace quits at 2 a.m. in a January cold snap, call (970) 1234567 and we triage the situation on the phone. Emergency calls get priority scheduling, and we bring the common failure parts so most emergency visits close in one trip.
Check three things: whether they diagnose with real instruments instead of guessing, whether they quote the repair before starting, and whether they carry parts for your furnace brand. A tech who meters the igniter and reads flue gas will find the actual fault. One who skips straight to a replacement quote is selling, not repairing.
Yes, and it covers the whole Weld County corridor, from Severance out to Windsor, Eaton and Greeley. Emergency calls get triaged on the phone so we know what parts to load. If you smell gas or see soot around the furnace, leave the house and call from outside before anything else.
Get Furnace Repair Severance CO Homeowners Trust
(970) 1234567No heat, banging noise, or a furnace blowing cold air? Call (970) 1234567 and a real tech will pick up, not a call center.
Call for Furnace Repair in Severance
Call (970) 1234567 and describe what your furnace is doing. We answer, triage the symptom and give you a two-hour arrival window. Regular hours run 8 a.m. to 6 p.m. Monday through Friday, with emergency coverage for no-heat calls. If you are in ZIP 80650, 80546, 80550 or 80610, you are in our regular service area.